Mini Wide垂直电泳系统, MV-10WDSYS
产品介绍
The Mini Wide Vertical Electrophoresis System (MV-10WDSYS) with a gel width of 200mm effectively doubles the number of samples that can be resolved when compared to the Mini Vertical Electrophoresis System. This allows consistency of sample comparison on a single gel and is designed for those with greater than 20 samples to compare and resolve. Simple set up using ultra soft silicone seals guarantees trouble free glass plate loading and gel casting. Dual gaskets on the gel running insert along with notched and plain glass plates ensure leak proof gel running. Rapid set up cooling retains resolution in extended separations and also saves buffer volume without affecting run quality. 4mm thick glass plates reduce breakage and have bonded spaces for added convenience. A wide range of accessories are available to allow for many techniques to be performed using the same unit. Prep combs can be used to maximize sample loading and recovery.
MS02_Electrophoresis* Marketing video
- 一体成型槽体铸造，密封耐用
- 快速凝胶注模和上样
- 缓冲溶液消耗量少
- 最多可同时跑四片凝胶
- 清晰的制胶与电泳上样指示
- 配置冷却包
- 制胶容易且凝胶不渗漏
- 价格很具有竞争力
* 技术规格如有更改，恕不另行通知。
MV-10WDSYS product is offered as a complete system for the user to cast, and run electrophoresis. It including:
• 1 x Electrophoresis tank & lid & inner running module
• 1 x MV-10WNG (200x100mm notched glass plates, 2mm thick, pk/2)
• 1 x MV-10WPGS1 (200x100mm plain glass plates with 1mm bonded spacers, pk/2)
• 1 x MV-10WDP (dummy plate)
• 2 x MV-20-24-1 (24 sample combs, 1mm thick)
• 1 x MV-20DCAST (200x100mm casting base )
• 1 x MV-20ICB (mini cooling pack)
• 1 x MS-DAG-GT01 (sillcone water repellent spray 5ml)
• 1 x Black & red electrophoresis cable
| 订购型号 | MV-10WDSYS | |
|---|---|---|
| 产品尺寸 (WxLxH) | 约 10.2"x6.3"x6.3" (260x160x160mm) | |
| 玻璃板尺寸 (WxL) | 约 7.9"x3.9" (200x100mm) | |
| 胶片尺寸 (WxL) | 约 7.1"x3.2" (180x80mm) | |
| 最大样本量 | 192 个, 每片胶48 个 | |
| 缓冲溶液体积 | 0.16gal - 0.74gal (600 - 2800ml) | |
| 冷却包 | 有，含在内 | |
| 替代挡板与制胶底座 | 有，含在内 | |
| 安全装置 | 上盖只能以单一方向固定 拿起上盖时，电源线跟着上盖移开 |
|
| 快速制胶 | 使用制胶台 | |
* Mini wide system 使用相同的梳子 MV-20WAVESYS System.
| 订购型号 | 产品描述 |
|---|---|
| MV-10WDSYS | Mini Wide 垂直电泳槽 Apparatus 内含迷你200x100mm双板设计，2组边条厚度1mm玻璃片组 2支24样本齿梳，厚度1mm厚度，冷却包，替代挡板及制胶底座 |
| MV-20DCAST | Maxi casting base for MV-10WDSYS & MV-20WAVESYS |
| MV-20DCASTM | 替换橡胶垫 200x100mm 制胶底座用 |
| MV-10WDIRM | 垂直电泳内芯模块 |
| MV-20ICB | Maxi 冷却包 |
| MV-10WLID | MV-10W lid (No cables) |
| MV-10WTANK | MV-10W Tank |
| MV-10WNG | 200x100mm 凹槽玻璃片组, 4mm thick (2片/包) |
| MV-10WPG | 200x100mm 平板玻璃片组, 4mm thick (2片/包) |
| MV-10WPGS0.75 | 200x100mm 平板玻璃片组 with 0.75mm 边条 (2片/包) |
| MV-10WPGS1 | 200x100mm 平板玻璃片组 with 1mm 边条 (2片/包) |
| MV-10WPGS1.5 | 200x100mm 平板玻璃片组 with 1.5mm 边条 (2片/包) |
| MV-10WPGS2 | 200x100mm 平板玻璃片组 with 2mm 边条 (2片/包) |
| MV-10WNGS0.75 | 200x100mm 凹槽玻璃片组 with 0.75mm 边条 (2片/包) |
| MV-10WNGS1 | 200x100mm 凹槽玻璃片组 with 1mm 边条 (2片/包) |
| MV-10WDP | 替代档, 200x100mm |
| 订购型号 | 产品描述 |
|---|---|
| 齿梳配件 | |
| MV-20-1-0.75 | 齿梳 1 Prep, 1 Marker, 0.75mm 厚 |
| MV-20-5-0.75 | 齿梳 5 样本, 0.75mm 厚 |
| MV-20-10-0.75 | 齿梳 10 样本, 0.75mm 厚 |
| MV-20-18MC-0.75 | 齿梳 18 样本 MC, 0.75mm 厚 |
| MV-20-24-0.75 | 齿梳 24 样本, 0.75mm 厚 |
| MV-20-30-0.75 | 齿梳 30 样本, 0.75mm 厚 |
| MV-20-36MC-0.75 | 齿梳 36 sampl MC, 0.75mm 厚 |
| MV-20-48-0.75 | 齿梳 48 样本, 0.75mm 厚 |
| MV-20-1-1 | 齿梳 1 Prep, 1 Marker, 1mm 厚 |
| MV-20-5-1 | 齿梳 5 样本, 1mm 厚 |
| MV-20-10-1 | 齿梳 10 样本, 1mm 厚 |
| MV-20-18MC-1 | 齿梳 18 样本 MC, 1mm 厚 |
| MV-20-24-1 | 齿梳 24 样本, 1mm 厚 |
| MV-20-30-1 | 齿梳 30 样本, 1mm 厚 |
| MV-20-36MC-1 | 齿梳 36 sampl MC, 1mm 厚 |
| MV-20-48-1 | 齿梳 48 样本, 1mm 厚 |
| MV-20-1-1.5 | 齿梳 1 Prep, 1 Marker, 1.5mm 厚 |
| MV-20-5-1.5 | 齿梳 5 样本, 1.5mm 厚 |
| MV-20-10-1.5 | 齿梳 10 样本, 1.5mm 厚 |
| MV-20-18MC-1.5 | 齿梳 18 样本 MC, 1.5mm 厚 |
| MV-20-24-1.5 | 齿梳 24 样本, 1.5mm 厚 |
| MV-20-30-1.5 | 齿梳 30 样本, 1.5mm 厚 |
| MV-20-36MC-1.5 | 齿梳 36 sampl MC, 1.5mm 厚 |
| MV-20-48-1.5 | 齿梳 48 样本, 1.5mm 厚 |
| MV-20-1-2 | 齿梳 1 Prep, 1 Marker, 2mm 厚 |
| MV-20-5-2 | 齿梳 5 样本, 2mm 厚 |
| MV-20-10-2 | 齿梳 10 样本, 2mm 厚 |
| MV-20-18MC-2 | 齿梳 18 样本 MC, 2mm 厚 |
| MV-20-24-2 | 齿梳 24 样本, 2mm 厚 |
| MV-20-30-2 | 齿梳 30 样本, 2mm 厚 |
| MV-20-36MC-2 | 齿梳 36 sampl MC, 2mm 厚 |
| MV-20-48-2 | 齿梳 48 样本, 2mm 厚 |
